HTTPClient

Low-level hyper-text transfer protocol client.

Description

Hyper-text transfer protocol client (sometimes called "User Agent"). Used to make HTTP requests to download web content, upload files and other data or to communicate with various services, among other use cases.

See the HTTPRequest node for a higher-level alternative.

Note: This client only needs to connect to a host once (see connect_to_host) to send multiple requests. Because of this, methods that take URLs usually take just the part after the host instead of the full URL, as the client is already connected to a host. See request for a full example and to get started.

A HTTPClient should be reused between multiple requests or to connect to different hosts instead of creating one client per request. Supports Transport Layer Security (TLS), including server certificate verification. HTTP status codes in the 2xx range indicate success, 3xx redirection (i.e. "try again, but over here"), 4xx something was wrong with the request, and 5xx something went wrong on the server's side.

For more information on HTTP, see MDN's documentation on HTTP (or read RFC 2616 to get it straight from the source).

Note: When exporting to Android, make sure to enable the INTERNET permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android.

Note: It's recommended to use transport encryption (TLS) and to avoid sending sensitive information (such as login credentials) in HTTP GET URL parameters. Consider using HTTP POST requests or HTTP headers for such information instead.

Note: When performing HTTP requests from a project exported to Web, keep in mind the remote server may not allow requests from foreign origins due to CORS. If you host the server in question, you should modify its backend to allow requests from foreign origins by adding the Access-Control-Allow-Origin: * HTTP header.

Note: TLS support is currently limited to TLS 1.0, TLS 1.1, and TLS 1.2. Attempting to connect to a TLS 1.3-only server will return an error.

Warning: TLS certificate revocation and certificate pinning are currently not supported. Revoked certificates are accepted as long as they are otherwise valid. If this is a concern, you may want to use automatically managed certificates with a short validity period.

Tutorials

Properties


bool	blocking_mode_enabled	false
StreamPeer	connection
int	read_chunk_size	65536

Methods


void	close()
Error	connect_to_host(host: String, port: int = -1, tls_options: TLSOptions = null)
int	get_response_body_length() const
int	get_response_code() const
PackedStringArray	get_response_headers()
Dictionary	get_response_headers_as_dictionary()
Status	get_status() const
bool	has_response() const
bool	is_response_chunked() const
Error	poll()
String	query_string_from_dict(fields: Dictionary)
PackedByteArray	read_response_body_chunk()
Error	request(method: Method, url: String, headers: PackedStringArray, body: String = "")
Error	request_raw(method: Method, url: String, headers: PackedStringArray, body: PackedByteArray)
void	set_http_proxy(host: String, port: int)
void	set_https_proxy(host: String, port: int)

Enumerations

enum Method: 🔗

Method METHOD_GET = 0

HTTP GET method. The GET method requests a representation of the specified resource. Requests using GET should only retrieve data.

Method METHOD_HEAD = 1

HTTP HEAD method. The HEAD method asks for a response identical to that of a GET request, but without the response body. This is useful to request metadata like HTTP headers or to check if a resource exists.

Method METHOD_POST = 2

HTTP POST method. The POST method is used to submit an entity to the specified resource, often causing a change in state or side effects on the server. This is often used for forms and submitting data or uploading files.

Method METHOD_PUT = 3

HTTP PUT method. The PUT method asks to replace all current representations of the target resource with the request payload. (You can think of POST as "create or update" and PUT as "update", although many services tend to not make a clear distinction or change their meaning).

Method METHOD_DELETE = 4

HTTP DELETE method. The DELETE method requests to delete the specified resource.

Method METHOD_OPTIONS = 5

HTTP OPTIONS method. The OPTIONS method asks for a description of the communication options for the target resource. Rarely used.

Method METHOD_TRACE = 6

HTTP TRACE method. The TRACE method performs a message loop-back test along the path to the target resource. Returns the entire HTTP request received in the response body. Rarely used.

Method METHOD_CONNECT = 7

HTTP CONNECT method. The CONNECT method establishes a tunnel to the server identified by the target resource. Rarely used.

Method METHOD_PATCH = 8

HTTP PATCH method. The PATCH method is used to apply partial modifications to a resource.

Method METHOD_MAX = 9

Represents the size of the Method enum.

enum Status: 🔗

Status STATUS_DISCONNECTED = 0

Status: Disconnected from the server.

Status STATUS_RESOLVING = 1

Status: Currently resolving the hostname for the given URL into an IP.

Status STATUS_CANT_RESOLVE = 2

Status: DNS failure: Can't resolve the hostname for the given URL.

Status STATUS_CONNECTING = 3

Status: Currently connecting to server.

Status STATUS_CANT_CONNECT = 4

Status: Can't connect to the server.

Status STATUS_CONNECTED = 5

Status: Connection established.

Status STATUS_REQUESTING = 6

Status: Currently sending request.

Status STATUS_BODY = 7

Status: HTTP body received.

Status STATUS_CONNECTION_ERROR = 8

Status: Error in HTTP connection.

Status STATUS_TLS_HANDSHAKE_ERROR = 9

Status: Error in TLS handshake.

enum ResponseCode: 🔗

ResponseCode RESPONSE_CONTINUE = 100

HTTP status code 100 Continue. Interim response that indicates everything so far is OK and that the client should continue with the request (or ignore this status if already finished).

ResponseCode RESPONSE_SWITCHING_PROTOCOLS = 101

HTTP status code 101 Switching Protocol. Sent in response to an Upgrade request header by the client. Indicates the protocol the server is switching to.

ResponseCode RESPONSE_PROCESSING = 102

HTTP status code 102 Processing (WebDAV). Indicates that the server has received and is processing the request, but no response is available yet.

ResponseCode RESPONSE_OK = 200

HTTP status code 200 OK. The request has succeeded. Default response for successful requests. Meaning varies depending on the request. GET: The resource has been fetched and is transmitted in the message body. HEAD: The entity headers are in the message body. POST: The resource describing the result of the action is transmitted in the message body. TRACE: The message body contains the request message as received by the server.

ResponseCode RESPONSE_CREATED = 201

HTTP status code 201 Created. The request has succeeded and a new resource has been created as a result of it. This is typically the response sent after a PUT request.

ResponseCode RESPONSE_ACCEPTED = 202

HTTP status code 202 Accepted. The request has been received but not yet acted upon. It is non-committal, meaning that there is no way in HTTP to later send an asynchronous response indicating the outcome of processing the request. It is intended for cases where another process or server handles the request, or for batch processing.

ResponseCode RESPONSE_NON_AUTHORITATIVE_INFORMATION = 203

HTTP status code 203 Non-Authoritative Information. This response code means returned meta-information set is not exact set as available from the origin server, but collected from a local or a third party copy. Except this condition, 200 OK response should be preferred instead of this response.

ResponseCode RESPONSE_NO_CONTENT = 204

HTTP status code 204 No Content. There is no content to send for this request, but the headers may be useful. The user-agent may update its cached headers for this resource with the new ones.

ResponseCode RESPONSE_RESET_CONTENT = 205

HTTP status code 205 Reset Content. The server has fulfilled the request and desires that the client resets the "document view" that caused the request to be sent to its original state as received from the origin server.

ResponseCode RESPONSE_PARTIAL_CONTENT = 206

HTTP status code 206 Partial Content. This response code is used because of a range header sent by the client to separate download into multiple streams.

ResponseCode RESPONSE_MULTI_STATUS = 207

HTTP status code 207 Multi-Status (WebDAV). A Multi-Status response conveys information about multiple resources in situations where multiple status codes might be appropriate.

ResponseCode RESPONSE_ALREADY_REPORTED = 208

HTTP status code 208 Already Reported (WebDAV). Used inside a DAV: propstat response element to avoid enumerating the internal members of multiple bindings to the same collection repeatedly.

ResponseCode RESPONSE_IM_USED = 226

HTTP status code 226 IM Used (WebDAV). The server has fulfilled a GET request for the resource, and the response is a representation of the result of one or more instance-manipulations applied to the current instance.

ResponseCode RESPONSE_MULTIPLE_CHOICES = 300

HTTP status code 300 Multiple Choice. The request has more than one possible responses and there is no standardized way to choose one of the responses. User-agent or user should choose one of them.

ResponseCode RESPONSE_MOVED_PERMANENTLY = 301

HTTP status code 301 Moved Permanently. Redirection. This response code means the URI of requested resource has been changed. The new URI is usually included in the response.

ResponseCode RESPONSE_FOUND = 302

HTTP status code 302 Found. Temporary redirection. This response code means the URI of requested resource has been changed temporarily. New changes in the URI might be made in the future. Therefore, this same URI should be used by the client in future requests.

ResponseCode RESPONSE_SEE_OTHER = 303

HTTP status code 303 See Other. The server is redirecting the user agent to a different resource, as indicated by a URI in the Location header field, which is intended to provide an indirect response to the original request.

ResponseCode RESPONSE_NOT_MODIFIED = 304

HTTP status code 304 Not Modified. A conditional GET or HEAD request has been received and would have resulted in a 200 OK response if it were not for the fact that the condition evaluated to false.

ResponseCode RESPONSE_USE_PROXY = 305

Deprecated: Many clients ignore this response code for security reasons. It is also deprecated by the HTTP standard.

HTTP status code 305 Use Proxy.

ResponseCode RESPONSE_SWITCH_PROXY = 306

Deprecated: Many clients ignore this response code for security reasons. It is also deprecated by the HTTP standard.

HTTP status code 306 Switch Proxy.

ResponseCode RESPONSE_TEMPORARY_REDIRECT = 307

HTTP status code 307 Temporary Redirect. The target resource resides temporarily under a different URI and the user agent MUST NOT change the request method if it performs an automatic redirection to that URI.

ResponseCode RESPONSE_PERMANENT_REDIRECT = 308

HTTP status code 308 Permanent Redirect. The target resource has been assigned a new permanent URI and any future references to this resource ought to use one of the enclosed URIs.

ResponseCode RESPONSE_BAD_REQUEST = 400

HTTP status code 400 Bad Request. The request was invalid. The server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, invalid request contents, or deceptive request routing).

ResponseCode RESPONSE_UNAUTHORIZED = 401

HTTP status code 401 Unauthorized. Credentials required. The request has not been applied because it lacks valid authentication credentials for the target resource.

ResponseCode RESPONSE_PAYMENT_REQUIRED = 402

HTTP status code 402 Payment Required. This response code is reserved for future use. Initial aim for creating this code was using it for digital payment systems, however this is not currently used.

ResponseCode RESPONSE_FORBIDDEN = 403

HTTP status code 403 Forbidden. The client does not have access rights to the content, i.e. they are unauthorized, so server is rejecting to give proper response. Unlike 401, the client's identity is known to the server.

ResponseCode RESPONSE_NOT_FOUND = 404

HTTP status code 404 Not Found. The server can not find requested resource. Either the URL is not recognized or the endpoint is valid but the resource itself does not exist. May also be sent instead of 403 to hide existence of a resource if the client is not authorized.

ResponseCode RESPONSE_METHOD_NOT_ALLOWED = 405

HTTP status code 405 Method Not Allowed. The request's HTTP method is known by the server but has been disabled and cannot be used. For example, an API may forbid DELETE-ing a resource. The two mandatory methods, GET and HEAD, must never be disabled and should not return this error code.

ResponseCode RESPONSE_NOT_ACCEPTABLE = 406

HTTP status code 406 Not Acceptable. The target resource does not have a current representation that would be acceptable to the user agent, according to the proactive negotiation header fields received in the request. Used when negotiation content.

ResponseCode RESPONSE_PROXY_AUTHENTICATION_REQUIRED = 407

HTTP status code 407 Proxy Authentication Required. Similar to 401 Unauthorized, but it indicates that the client needs to authenticate itself in order to use a proxy.

ResponseCode RESPONSE_REQUEST_TIMEOUT = 408

HTTP status code 408 Request Timeout. The server did not receive a complete request message within the time that it was prepared to wait.

ResponseCode RESPONSE_CONFLICT = 409

HTTP status code 409 Conflict. The request could not be completed due to a conflict with the current state of the target resource. This code is used in situations where the user might be able to resolve the conflict and resubmit the request.

ResponseCode RESPONSE_GONE = 410

HTTP status code 410 Gone. The target resource is no longer available at the origin server and this condition is likely permanent.

ResponseCode RESPONSE_LENGTH_REQUIRED = 411

HTTP status code 411 Length Required. The server refuses to accept the request without a defined Content-Length header.

ResponseCode RESPONSE_PRECONDITION_FAILED = 412

HTTP status code 412 Precondition Failed. One or more conditions given in the request header fields evaluated to false when tested on the server.

ResponseCode RESPONSE_REQUEST_ENTITY_TOO_LARGE = 413

HTTP status code 413 Entity Too Large. The server is refusing to process a request because the request payload is larger than the server is willing or able to process.

ResponseCode RESPONSE_REQUEST_URI_TOO_LONG = 414

HTTP status code 414 Request-URI Too Long. The server is refusing to service the request because the request-target is longer than the server is willing to interpret.

ResponseCode RESPONSE_UNSUPPORTED_MEDIA_TYPE = 415

HTTP status code 415 Unsupported Media Type. The origin server is refusing to service the request because the payload is in a format not supported by this method on the target resource.

ResponseCode RESPONSE_REQUESTED_RANGE_NOT_SATISFIABLE = 416

HTTP status code 416 Requested Range Not Satisfiable. None of the ranges in the request's Range header field overlap the current extent of the selected resource or the set of ranges requested has been rejected due to invalid ranges or an excessive request of small or overlapping ranges.

ResponseCode RESPONSE_EXPECTATION_FAILED = 417

HTTP status code 417 Expectation Failed. The expectation given in the request's Expect header field could not be met by at least one of the inbound servers.

ResponseCode RESPONSE_IM_A_TEAPOT = 418

HTTP status code 418 I'm A Teapot. Any attempt to brew coffee with a teapot should result in the error code "418 I'm a teapot". The resulting entity body MAY be short and stout.

ResponseCode RESPONSE_MISDIRECTED_REQUEST = 421

HTTP status code 421 Misdirected Request. The request was directed at a server that is not able to produce a response. This can be sent by a server that is not configured to produce responses for the combination of scheme and authority that are included in the request URI.

ResponseCode RESPONSE_UNPROCESSABLE_ENTITY = 422

HTTP status code 422 Unprocessable Entity (WebDAV). The server understands the content type of the request entity (hence a 415 Unsupported Media Type status code is inappropriate), and the syntax of the request entity is correct (thus a 400 Bad Request status code is inappropriate) but was unable to process the contained instructions.

ResponseCode RESPONSE_LOCKED = 423

HTTP status code 423 Locked (WebDAV). The source or destination resource of a method is locked.

ResponseCode RESPONSE_FAILED_DEPENDENCY = 424

HTTP status code 424 Failed Dependency (WebDAV). The method could not be performed on the resource because the requested action depended on another action and that action failed.

ResponseCode RESPONSE_UPGRADE_REQUIRED = 426

HTTP status code 426 Upgrade Required. The server refuses to perform the request using the current protocol but might be willing to do so after the client upgrades to a different protocol.

ResponseCode RESPONSE_PRECONDITION_REQUIRED = 428

HTTP status code 428 Precondition Required. The origin server requires the request to be conditional.

ResponseCode RESPONSE_TOO_MANY_REQUESTS = 429

HTTP status code 429 Too Many Requests. The user has sent too many requests in a given amount of time (see "rate limiting"). Back off and increase time between requests or try again later.

ResponseCode RESPONSE_REQUEST_HEADER_FIELDS_TOO_LARGE = 431

HTTP status code 431 Request Header Fields Too Large. The server is unwilling to process the request because its header fields are too large. The request MAY be resubmitted after reducing the size of the request header fields.

ResponseCode RESPONSE_UNAVAILABLE_FOR_LEGAL_REASONS = 451

HTTP status code 451 Response Unavailable For Legal Reasons. The server is denying access to the resource as a consequence of a legal demand.

ResponseCode RESPONSE_INTERNAL_SERVER_ERROR = 500

HTTP status code 500 Internal Server Error. The server encountered an unexpected condition that prevented it from fulfilling the request.

ResponseCode RESPONSE_NOT_IMPLEMENTED = 501

HTTP status code 501 Not Implemented. The server does not support the functionality required to fulfill the request.

ResponseCode RESPONSE_BAD_GATEWAY = 502

HTTP status code 502 Bad Gateway. The server, while acting as a gateway or proxy, received an invalid response from an inbound server it accessed while attempting to fulfill the request. Usually returned by load balancers or proxies.

ResponseCode RESPONSE_SERVICE_UNAVAILABLE = 503

HTTP status code 503 Service Unavailable. The server is currently unable to handle the request due to a temporary overload or scheduled maintenance, which will likely be alleviated after some delay. Try again later.

ResponseCode RESPONSE_GATEWAY_TIMEOUT = 504

HTTP status code 504 Gateway Timeout. The server, while acting as a gateway or proxy, did not receive a timely response from an upstream server it needed to access in order to complete the request. Usually returned by load balancers or proxies.

ResponseCode RESPONSE_HTTP_VERSION_NOT_SUPPORTED = 505

HTTP status code 505 HTTP Version Not Supported. The server does not support, or refuses to support, the major version of HTTP that was used in the request message.

ResponseCode RESPONSE_VARIANT_ALSO_NEGOTIATES = 506

HTTP status code 506 Variant Also Negotiates. The server has an internal configuration error: the chosen variant resource is configured to engage in transparent content negotiation itself, and is therefore not a proper end point in the negotiation process.

ResponseCode RESPONSE_INSUFFICIENT_STORAGE = 507

HTTP status code 507 Insufficient Storage. The method could not be performed on the resource because the server is unable to store the representation needed to successfully complete the request.

ResponseCode RESPONSE_LOOP_DETECTED = 508

HTTP status code 508 Loop Detected. The server terminated an operation because it encountered an infinite loop while processing a request with "Depth: infinity". This status indicates that the entire operation failed.

ResponseCode RESPONSE_NOT_EXTENDED = 510

HTTP status code 510 Not Extended. The policy for accessing the resource has not been met in the request. The server should send back all the information necessary for the client to issue an extended request.

ResponseCode RESPONSE_NETWORK_AUTH_REQUIRED = 511

HTTP status code 511 Network Authentication Required. The client needs to authenticate to gain network access.

Property Descriptions

bool blocking_mode_enabled = false 🔗

void set_blocking_mode(value: bool)
bool is_blocking_mode_enabled()

If true, execution will block until all data is read from the response.

StreamPeer connection 🔗

void set_connection(value: StreamPeer)
StreamPeer get_connection()

The connection to use for this client.

int read_chunk_size = 65536 🔗

void set_read_chunk_size(value: int)
int get_read_chunk_size()

The size of the buffer used and maximum bytes to read per iteration. See read_response_body_chunk.

Method Descriptions

void close() 🔗

Closes the current connection, allowing reuse of this HTTPClient.

Error connect_to_host(host: String, port: int = -1, tls_options: TLSOptions = null) 🔗

Connects to a host. This needs to be done before any requests are sent.

If no port is specified (or -1 is used), it is automatically set to 80 for HTTP and 443 for HTTPS. You can pass the optional tls_options parameter to customize the trusted certification authorities, or the common name verification when using HTTPS. See TLSOptions.client and TLSOptions.client_unsafe.

int get_response_body_length() const 🔗

Returns the response's body length.

Note: Some Web servers may not send a body length. In this case, the value returned will be -1. If using chunked transfer encoding, the body length will also be -1.

Note: This function always returns -1 on the Web platform due to browsers limitations.

int get_response_code() const 🔗

Returns the response's HTTP status code.

PackedStringArray get_response_headers() 🔗

Returns the response headers.

Dictionary get_response_headers_as_dictionary() 🔗

Returns all response headers as a Dictionary of structure { "key": "value1; value2" } where the case-sensitivity of the keys and values is kept like the server delivers it. A value is a simple String, this string can have more than one value where "; " is used as separator.

Example:

gdscript

{
    "content-length": 12,
    "Content-Type": "application/json; charset=UTF-8",
}

Status get_status() const 🔗

Returns a Status constant. Need to call poll in order to get status updates.

bool has_response() const 🔗

If true, this HTTPClient has a response available.

bool is_response_chunked() const 🔗

If true, this HTTPClient has a response that is chunked.

Error poll() 🔗

This needs to be called in order to have any request processed. Check results with get_status.

String query_string_from_dict(fields: Dictionary) 🔗

Generates a GET/POST application/x-www-form-urlencoded style query string from a provided dictionary, e.g.:

gdscript

var fields = {"username": "user", "password": "pass"}
var query_string = http_client.query_string_from_dict(fields)
# Returns "username=user&password=pass"

Furthermore, if a key has a null value, only the key itself is added, without equal sign and value. If the value is an array, for each value in it a pair with the same key is added.

gdscript

var fields = {"single": 123, "not_valued": null, "multiple": [22, 33, 44]}
var query_string = http_client.query_string_from_dict(fields)
# Returns "single=123&not_valued&multiple=22&multiple=33&multiple=44"

PackedByteArray read_response_body_chunk() 🔗

Reads one chunk from the response.

Error request(method: Method, url: String, headers: PackedStringArray, body: String = "") 🔗

Sends a request to the connected host.

The URL parameter is usually just the part after the host, so for https://somehost.com/index.php, it is /index.php. When sending requests to an HTTP proxy server, it should be an absolute URL. For METHOD_OPTIONS requests, * is also allowed. For METHOD_CONNECT requests, it should be the authority component (host:port).

Headers are HTTP request headers. For available HTTP methods, see Method.

To create a POST request with query strings to push to the server, do:

gdscript

var fields = {"username" : "user", "password" : "pass"}
var query_string = http_client.query_string_from_dict(fields)
var headers = ["Content-Type: application/x-www-form-urlencoded", "Content-Length: " + str(query_string.length())]
var result = http_client.request(http_client.METHOD_POST, "/index.php", headers, query_string)

Note: The body parameter is ignored if method is METHOD_GET. This is because GET methods can't contain request data. As a workaround, you can pass request data as a query string in the URL. See String.uri_encode for an example.

Error request_raw(method: Method, url: String, headers: PackedStringArray, body: PackedByteArray) 🔗

Sends a raw request to the connected host.

Headers are HTTP request headers. For available HTTP methods, see Method.

Sends the body data raw, as a byte array and does not encode it in any way.

void set_http_proxy(host: String, port: int) 🔗

Sets the proxy server for HTTP requests.

The proxy server is unset if host is empty or port is -1.

void set_https_proxy(host: String, port: int) 🔗

Sets the proxy server for HTTPS requests.

The proxy server is unset if host is empty or port is -1.

HTTPClient ​

Description

Tutorials

Properties

Methods

Enumerations

Property Descriptions

Method Descriptions

HTTPClient